Skip to content

How to change BMX grips

New grips cost little and make a big difference. The most important part: they must not turn, and you always need bar ends.

What you need

  • New BMX grips
  • Bar ends
  • Hairspray or grip glue
  • A cutter or a thin screwdriver for the old grips

Step by step

  1. Remove the bar ends and the old grips. Cut them off carefully along the bar, or slide a thin screwdriver under the grip and spray a little water in.
  2. Clean the bar so there is no old glue or dirt left.
  3. Spray hairspray into the grip or onto the bar, or use grip glue.
  4. Slide the grip on quickly in one go and turn it so the pattern sits the way you like.
  5. Let it dry, ideally overnight, before you ride.
  6. Put the bar ends in and tighten them.

Tips

  • Never ride without bar ends: an open bar end can cause serious injuries in a crash.
  • Flangeless grips are better for barspins, flanged grips protect your hands.

Parts and tools in our shop

Grips | Bar ends | Handlebars

Not sure? Ask us in the store in Cologne or send us a message. More guides →

Previous article How to mount BMX pegs
Next article BMX chain: set the tension and replace it
1