BMX has its own language. Here we explain the most important terms simply, from parts to tricks to spots. Most terms stay English in every language.
Bike and parts
- 4130 Chromoly: A strong steel alloy for frames and parts. Lighter and tougher than hi-ten steel. →
- Hi-Ten: Simple high tensile steel, used on entry level bikes. Heavier than chromoly.
- Toptube: The top tube of the frame. Its length decides how much room you have on the bike. →
- Chainstay: The frame tubes from the bottom bracket to the rear axle. Short chainstays make manuals easier.
- Offset: How far the front axle sits in front of the fork. Less offset makes the bike more agile. →
- Bottom bracket (BB): The bearings for the crank in the frame. Common types are Mid, Spanish, American and Euro.
- Sealed bearings: Closed bearings that keep dirt out. They run smoother and need less care.
- Sprocket: The front chain ring on the crank. →
- Driver: The small rear cog on the hub. With the sprocket it sets your gear ratio, for example 25/9. →
- Cassette: Rear hub type: the pedals turn when you roll backwards. →
- Freecoaster: Rear hub type: you can roll backwards without the pedals turning. Good for fakie tricks. →
- RHD / LHD: Right hand drive or left hand drive: the side the chain runs on.
- Half link: Chain where every link can be removed, so you can set the length very exactly. →
- Female / male axle: Female axles use bolts that screw into the axle, male axles have threaded axle ends with nuts. →
- Pegs: Tubes on the axles for grinds and stalls. →
- Hub guard: Protects driver, hub and spokes when you grind. →
- U-brake: The usual rear brake on freestyle BMX. →
- Gyro: A system that lets the bars spin without the brake cable getting tangled. →
- Brakeless: Riding without a brake, popular with experienced street riders.
- Top load / front load: Two stem types: the bars are clamped from above or from the front. →
- Rise: How high the handlebar is. More rise means a higher front end. →
- Bar ends: Plugs for the ends of the bars. Always use them, open bar ends can cause serious injuries. →
- Flangeless: Grips without a flange, better for barspins. →
Tricks
- Manual: Riding on the back wheel without pedalling.
- Bunny hop: Jumping with both wheels without a ramp.
- Fakie: Rolling backwards.
- 180 / 360: Half or full turn in the air.
- Barspin: Spinning the bars once around in the air.
- Tailwhip: Spinning the frame once around the front end in the air.
- Grind: Sliding on the pegs along an edge or rail.
- Stall: Stopping for a moment on an obstacle, for example on the pegs.
Spots and styles
- Street: Riding in the city on curbs, stairs, rails and ledges.
- Park: Riding in the skatepark on ramps, bowls and obstacles.
- Dirt / trails: Jumping on lines built from dirt.
- Flatland: Tricks on flat ground, balancing on the bike.
- Race: Racing on a BMX track with start gate, jumps and berms. →
- Quarter pipe: A ramp with one curved wall.
- Bowl: A deep pool shaped area with curved walls all around.
- Coping: The metal pipe on the top edge of a ramp.
- Ledge: A box or edge for grinds.
- Pumptrack: A loop with rollers and berms where you gain speed by pumping, not pedalling.
Frequently asked questions
Is a term missing?
Tell us in the store or send us a message, we will add it.
Where can I learn the tricks?
In our BMX guides we explain manual, bunny hop, fakie, 180 and the first grind step by step.
Why People's Store?
- BMX shop in Cologne since 2006, riders advising riders
- Bikes are assembled and checked in our workshop
- Fast shipping of in stock items