Skip to content

Your first BMX grind: double peg

In a double peg grind both pegs slide on the edge at the same time. You need a solid bunny hop for it.

What you need

  • Pegs on the front and rear wheel, on the same side
  • A low curb or ledge in a skatepark
  • Grind wax if the edge is rough
  • A helmet

Step by step

  1. Pick a low, smooth edge, knee high or lower, with your pegs on the side facing it.
  2. Ride in almost parallel to the edge, at a slight angle, with medium speed.
  3. Bunny hop and turn the bike slightly so both pegs land on top of the edge at the same time.
  4. Keep your weight centered and lean slightly away from the edge, look to the end of the ledge.
  5. Ride off at the end with a small hop and land on both wheels.

Tips

  • Start on a curb that is only a few centimetres high.
  • Do not wax benches or edges people sit on, only obstacles made for it.

Always wear a helmet, start small and practise on a quiet spot.

Parts and tools in our shop

Pegs | Grind wax | Hub guards

Not sure? Ask us in the store in Cologne or send us a message. More guides →

Next article How to do a 180 on a BMX
1