How to fix a flat tire on your BMX
A flat is the most common repair on a BMX. With the right tools you can fix it yourself in about 15 minutes.
What you need
- Two tire levers
- A new inner tube in the right size or a patch kit
- A pump
- The right wrench for your axle nuts or axle bolts
Step by step
- Remove the wheel. Loosen the axle nuts or bolts. On the rear wheel push the wheel forward and take the chain off the driver.
- Let all the air out and push the tire bead into the middle of the rim all the way around.
- Lever the tire off. Put the first lever in opposite the valve and hook it to a spoke. Put the second lever in a bit further and slide it around the rim.
- Find the cause. Pump up the old tube and listen for the hole. Feel carefully inside the tire for glass or thorns and check that the rim tape covers all spoke holes.
- Fit the new tube. Give it a little air so it holds its shape, put the valve in first and tuck the tube into the tire.
- Push the tire back on by hand, start at the valve and finish opposite. Do not use levers here, they can pinch the new tube.
- Pump it up slowly. Check that the line on the tire sits evenly on both sides, then pump to the pressure printed on the tire.
- Put the wheel back in, center it, set the chain tension on the rear wheel and tighten the nuts firmly. Check your brake.
Tips
- Always carry a spare tube and a small pump to the spot.
- Too little pressure causes pinch flats with two small holes next to each other.
Parts and tools in our shop
Inner tubes | Tires | Pumps | Tools
Not sure? Ask us in the store in Cologne or send us a message. More guides →